| |
ZS6RO > HARDWA 06.01.03 19:56l 42 Lines 1333 Bytes #999 (0) @ WW
BID : 21350_ZS1RO
Read: GUEST
Subj: Re: IC-2KL won't produce full power
Path: ON0AR<ON0AR<IK1ZNW<ON0BEL<CT4DK<CT2GNH<JN3AOU<JM1YSB<JE7YGF<KP4IG<
ZS6RO<ZS6RO
Sent: 030104/1138Z @:ZS6RO.SRJ.GAU.ZAF.AF #:21350 [Johannesburg] InterGate
RO
** NEWSGROUP: rec.radio.amateur.equipment
** FROM : Dave Shrader <david.shrader@attbi.com>
Stephen, turn ON the automatic antenna tuner in the 756 and see what
happens.
If you have a SWR >1.7 :1 between the 756 and the amplifier the 756 may
be automatically powering down.
Deacon Dave, W1MCE
Stephen Silberman wrote:
> I'm running an IC-2KL on 120 volts. Its driven by an IC-756pro and I
> also have the AT500 tuner. I find that I get 500 watts peak on 80
> meters. I don't operate 160 but on the other bands (15 thru 40) I can
> only get about 300 watts peak on SSB. I also notice that on those
> bands the 756pro is only showing about 15 to 20 watts peak on the
> power meter. If I put the amp in standby the transceiver goes right
> up to 100 watts peak.
>
> I've checked the ALC and it seems to be set properly. I've also
> observed that my SWR appears to be ok on my meter. (between the amp
> and the tuner).
>
> Does the amp have a problem? I'm open to suggestions as to what to do
> next as I'd like to get a bit more power on all bands.
>
> One more thing. I had the station apart and prior to that I was also
> getting about 500 watts on 15. Since I reassembled it I am only
> getting 300.
>
> Any help greatly appreciated!
>
> Steve
> W2KN
*** Reply to the originator and not to ZS6RO ***
Read previous mail | Read next mail
| |
