| |
VK7AX > MMSSTV 03.07.10 09:05l 201 Lines 6335 Bytes #999 (0) @ WW
BID : VK7AX0307UU
Read: GUEST
Subj: [MM-SSTV] Digest Number 2146
Path: ON0AR<HS1LMV<7M3TJZ<DK0WUE<IK6ZDE<IW0QNL<ON4HU<F1UOK<ON0BEL<VK7AX
Sent: 100703/0856Z @:VK7AX.#ULV.TAS.AUS.OC #:8798 [Ulverstone] FBB7.00g $:VK7AX
From: VK7AX@VK7AX.#ULV.TAS.AUS.OC
To : MMSSTV@WW
There are 3 messages in this issue.
Topics in this digest:
1a. Re: unwanted transmit while on receive
From: m0cov
1b. Re: unwanted transmit while on receive
From: Eddy Vaesen
1c. Re: unwanted transmit while on receive
From: Bud Haynes
Messages
________________________________________________________________________
1a. Re: unwanted transmit while on receive
Posted by: "m0cov" vic.m0cov(AT)ntlworld.com m0cov
Date: Thu Jul 1, 2010 6:46 am ((PDT))
--- In MM-SSTV(AT)yahoogroups.com, "Dave" <dave(AT)...> wrote:
> >
> > How is your transceiver connected to the PC? What are you using?
> >
> >
> > Dave
> > KA0SWT//1951 Willys Jeep Truck//
> > http://173.14.27.81/xampp/truck/truck-rebuild.htm
> > /++++++++++++++++++++++++++++++++/
> >
> > Hi dave I am using a interface (by G3liv)into a laptop(win 7)The interface
I have used for years but now uses an usb to serial port addapter .
I am using MMSSTV 1.11.The adapter and interface have been checked all OK.
I can stop it happening if I DO NOT CONNECT CABLES UNTIL AFTER BOOTING COMPUTER,
and starting mmsstv program.If I connect cables before booting computer,
the rig will go to TX as soon as I get an incoming signal.
> >
> >
> >
> > -----Original Message-----
> > From: MM-SSTV(AT)yahoogroups.com [mailto:MM-SSTV(AT)yahoogroups.com] On Behalf Of
> > m0cov
> > Sent: Wednesday, June 30, 2010 12:37
> > To: MM-SSTV(AT)yahoogroups.com
> > Subject: [MM-SSTV] Re: unwanted transmit while on receive
> >
> >
> >
> > --- In MM-SSTV(AT)yahoogroups.com, Eddy Vaesen <eddy(AT)> wrote:
>> > >
>> > > Hello Vic,
>> > >
>> > > Is your MMSSTV running in repeater mode? See this link for more info:
>> > > http://mmhamsoft.amateur-radio.ca/pages/mmsstv/repeater.php
>> > >
>> > > Regards, 73
>> > > ON7KEI de Eddy
>> > >
>> > > http://www.on7kei.be
>> > >
>> > > ======================================================================
>> > > =============================== Thankyou but no it is not running
>> > > repeater mode,but I had not checked so thank you. there is no "R" on end
> > of file name in properties.
>> > >
>> > > 2010/6/29 m0cov <vic.m0cov(AT)>
>> > >
Messages in this topic (8)
________________________________________________________________________
1b. Re: unwanted transmit while on receive
Posted by: "Eddy Vaesen" eddy(AT)on7kei.be on7kei
Date: Thu Jul 1, 2010 6:50 am ((PDT))
Hello Vic,
Please find attached an image of a setting that could be the problem, I
think this is the only setting that also can trigger an auto TX.
Option --> setup MMSSTV --> auto TX box ???
Regards, 73
ON7KEI de Eddy
http://www.on7kei.be
==========================================================================
2010/6/30 m0cov <vic.m0cov(AT)ntlworld.com>
> >
> >
> >
> >
> > --- In MM-SSTV(AT)yahoogroups.com <MM-SSTV%40yahoogroups.com>, Eddy Vaesen
> > <eddy(AT)...> wrote:
>> > >
>> > > Hello Vic,
>> > >
>> > > Is your MMSSTV running in repeater mode? See this link for more info:
>> > > http://mmhamsoft.amateur-radio.ca/pages/mmsstv/repeater.php
>> > >
>> > > Regards, 73
>> > > ON7KEI de Eddy
>> > >
>> > > http://www.on7kei.be
>> > >
>> > >
> > ====================================================================
>> > > Thankyou but no it is not running repeater mode,but I had not checked so
> > thank you. there is no "R" on end of file name in properties.
>> > >
>> > > 2010/6/29 m0cov <vic.m0cov(AT)...>
> >
>> > >
>>> > > >
>>> > > >
>>> > > > Hi all this is my first try at using this sevice so hope I do it right.
>>> > > > I am using MMSSTV 111 into a laptop (windows 7).I get the rig going
> > into TX
>>> > > > as without touching anything if i start computer up WITH CABLES
> > CONNECTED
>>> > > > BETEEN RIG AND COMPUTER,this happens as soon as I get a signal.I can
> > stop it
>>> > > > doing this if I start computer and mmsstv BEFORE CONNECTING CABLES.The
>>> > > > adapter was checked by G3LIV to make sure nothing was wrong ,all
> > OK.Please
>>> > > > any bright ideas.
>>> > > > M0COV
>>> > > >
Messages in this topic (8)
________________________________________________________________________
1c. Re: unwanted transmit while on receive
Posted by: "Bud Haynes" kv7g(AT)netcommander.com kv7gbud
Date: Thu Jul 1, 2010 8:28 am ((PDT))
>>>> > > > > Hi all this is my first try at using this sevice so hope I do it
> > right.
>>>> > > > > I am using MMSSTV 111 into a laptop (windows 7).I get the rig going
>>>> > > > > into TX as without touching anything if i start computer up WITH
>>>> > > > > CABLES CONNECTED BETEEN RIG AND COMPUTER,this happens as soon as I
>>>> > > > > get a signal.I can stop it doing this if I start computer and
> > mmsstv
>>>> > > > > BEFORE CONNECTING CABLES.The adapter was checked by G3LIV to make
>>>> > > > > sure nothing was wrong ,all OK.Please any bright ideas.
>>>> > > > > M0COV
> >
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
I am not sure who originated this message, but take a look here, that
used to be a common problem
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Windows ME and RS232 push-to-talk issues
The new "Millenium" or "ME" version of Windows may cause the RS232 DTR
and RTS lines to go "high" when it loads, keying your transmitter, and
leaving it keyed. In order to address that, we've written a small
program, FIXCOM.EXE . Here's how it works:
In your AUTOEXEC.BAT or Startup group, put a reference to FIXCOM, and
specify the COM port number you want to "fix". For example,
*FIXCOM 2*
will "fix" COM2 . FIXCOM supports COM ports 1 - 8. If you use more
than one port, simply use two references, each for the desired port.
Again for example, we'll use COM1 and COM2:
*FIXCOM 1
FIXCOM 2*
You can download FIXCOM.EXE <http://www.barberdsp.com/files/fixcom.exe>
here. (~32kb)
___________________________________________________
Bud - KV7G
******************************************************************
ABOVE IS A CROSS POST TO THE PACKET RADIO NETWORK IN AN EFFORT TO
PROMOTE FURTHER INTEREST IN SLOW SCAN TELEVISION AND PACKET RADIO
Courtesy Tony VK7AX VK7AX(AT)VK7AX.#ULV.TAS.AUS.OC
******************************************************************
Read previous mail | Read next mail
| |
