| |
VK7AX > MMSSTV 10.07.10 03:44l 108 Lines 2746 Bytes #999 (0) @ WW
BID : VK7AX1007SO
Read: GUEST
Subj: [MM-SSTV] Digest Number 2150
Path: ON0AR<HS1LMV<7M3TJZ<DK0WUE<IK6ZDE<IK2XDE<DB0RES<WA7V<VK7AX
Sent: 100710/0334Z @:VK7AX.#ULV.TAS.AUS.OC #:9088 [Ulverstone] FBB7.00g $:VK7AX
From: VK7AX@VK7AX.#ULV.TAS.AUS.OC
To : MMSSTV@WW
There are 2 messages in this issue.
Topics in this digest:
1a. Re: Signalink USB
From: Robert Heaton
1b. Re: Signalink USB
From: George Hughes
Messages
________________________________________________________________________
1a. Re: Signalink USB
Posted by: "Robert Heaton" wb4jpz1(AT)yahoo.com wb4jpz1
Date: Wed Jul 7, 2010 3:53 am ((PDT))
Why is it no one ever finishes the advice statement.
"READ THE BOOK READ THE BOOK READ THE BOOK,
NOW
DO = WHAT = IT SAYS !
73, BoB.
wb4jpz1(AT)yahoo.com
Messages in this topic (7)
________________________________________________________________________
1b. Re: Signalink USB
Posted by: "George Hughes" ghhughes(AT)cox.net af4gh
Date: Wed Jul 7, 2010 7:12 pm ((PDT))
Ok, I guess..... I remember I never had to do any of that......
My worked fine with MMSSTV.
Thanks for the info....
de AF4GH
From: Robert Sheskin
Sent: Wednesday, July 07, 2010 12:09 AM
To: MM-SSTV(AT)yahoogroups.com
Subject: Re: [MM-SSTV] Signalink USB
Since you seem to not have used sc_select I guess it would make it hard
to understand. The Signalink is a piece of hardware, it has drivers.
These drivers make the hardware usable by the computer. This allows
sc_select to list the USB codec for the Signalink. This must be selected
for the device to be available to MMSSTV.
73,
Bob N3PPH
On 7/6/2010 11:56 PM, George Hughes wrote:
> >
> > Curious as to why you have to select USB sound. Let the Signalink do
> > that. USB connects to the computer and data and PPT connects fo the
> > data port.
> > Set up the software according to the manual and good to go.....
> > de AF4GH
> >
> > From: Robert Sheskin
> > Sent: Tuesday, July 06, 2010 5:45 PM
> > To: MM-SSTV(AT)yahoogroups.com <mailto:MM-SSTV%40yahoogroups.com>
> > Subject: Re: [MM-SSTV] Signalink USB
> >
> > Works fine here. You need to use sc_select
> > http://mmhamsoft.amateur-radio.ca/pages/extras-add-on/soundcard-select.php
> >
> > That will let you choose USB sound.
> >
> > 73,
> > Bob N3PPH
> >
> > On 7/6/2010 1:22 PM, cjscoach wrote:
>> > >
>> > > I am new to this software. Does anyone have it working with a
>> > > Signalink USB interface by Tigertronics? I cannot figure out exactly
>> > > the settings for this setup.
Messages in this topic (7)
******************************************************************
ABOVE IS A CROSS POST TO THE PACKET RADIO NETWORK IN AN EFFORT TO
PROMOTE FURTHER INTEREST IN SLOW SCAN TELEVISION AND PACKET RADIO
Courtesy Tony VK7AX VK7AX(AT)VK7AX.#ULV.TAS.AUS.OC
******************************************************************
Read previous mail | Read next mail
| |
