| |
VK7AX > MMSSTV 13.07.10 02:45l 173 Lines 6018 Bytes #999 (0) @ WW
BID : VK7AX1307SQ
Read: GUEST
Subj: [MM-SSTV] Digest Number 2152
Path: ON0AR<N9ZZK<CX2SA<VK7AX
Sent: 100713/0242Z @:VK7AX.#ULV.TAS.AUS.OC #:9211 [Ulverstone] FBB7.00g $:VK7AX
From: VK7AX@VK7AX.#ULV.TAS.AUS.OC
To : MMSSTV@WW
There are 4 messages in this issue.
Topics in this digest:
1a. Re: Icom IC-7200 with HRD and MMSSTV help (audio now)
From: kb61751
1b. Re: Icom IC-7200 with HRD and MMSSTV help (audio now)
From: jdow
1c. Re: Icom IC-7200 with HRD and MMSSTV help Solved!
From: kb61751
2. Unwanted TX while on receive Update.
From: m0cov
Messages
________________________________________________________________________
1a. Re: Icom IC-7200 with HRD and MMSSTV help (audio now)
Posted by: "kb61751" kb61751(AT)yahoo.com kb61751
Date: Sun Jul 11, 2010 5:51 am ((PDT))
Yes I tried that, but still no audio on transmit. I have the radio set to USB (for 20m) It keys the transmitter, but no audio on transmit, great on receive.
--- In MM-SSTV(AT)yahoogroups.com, "Ken" <ve5kc(AT)...> wrote:
> >
> >
> >
> > Hi Ken,
> >
> > Sounds like you are not selecting the correct sound card?
> >
> > Are you using "Soundcard Select"?
> >
> > If not this should make it much easier to tell MMSSTV to use the Icom USB sound card function.
> >
> > Soundcard Select is located on the Extras & Add On page. (look down the menu on left side of page) http://mmhamsoft.amateur-radio.ca
> >
> > 73 - Ken - VE5KC
> > - http://amateur-radio.ca
> > - http://ham-radio.ca
> >
> > --- In MM-SSTV(AT)yahoogroups.com, "kb61751" <kb61751(AT)> wrote:
>> > >
>> > > I have gotten the ptt to work (downloaded a program from mmsstv for HRD. It will now switch over to transmit but no audio or signal out...
>> > >
>> > > --- In MM-SSTV(AT)yahoogroups.com, "kb61751" <kb61751(AT)> wrote:
>>> > > >
>>> > > > I just bought a Icom IC-7200, and use it with HRD ver 2614, and all works just fine. However when I run MMSSTV ver 1.11G, I can receive just fine, however I can not transmit at all, it looks like its transmitting, but the Icom does not change over to transmit. I am using USB com port 11. Any help would be greatly appreciated...
>>> > > >
>>> > > > Ken N0CP
Messages in this topic (7)
________________________________________________________________________
1b. Re: Icom IC-7200 with HRD and MMSSTV help (audio now)
Posted by: "jdow" jdow(AT)earthlink.net ferdyfubar
Date: Sun Jul 11, 2010 6:00 pm ((PDT))
I presume you tested to see if there is audio coming out of the computer
itself with a pair of earphones or the like. If you did, did you hear
anything? If you heard nothing, look for other audio outputs on your
computer and see if you get anything out of them. Also be sure you set
the output levels to something other than muted or all the way off. If
you do hear audio out of the computer let's look at the rest of the chain.
How is the audio connected to the transceiver? Some transceivers blank
the microphone inputs if you are using the CiV or rear panel PTT signals.
Have you checked for that possibility?
{^_^} Joanne, W6MKU
----- Original Message -----
From: "kb61751" <kb61751(AT)yahoo.com>
Sent: Sunday, 2010/July/11 05:21
> > Yes I tried that, but still no audio on transmit. I have the radio set to
> > USB (for 20m) It keys the transmitter, but no audio on transmit, great on
> > receive.
> >
> > --- In MM-SSTV(AT)yahoogroups.com, "Ken" <ve5kc(AT)...> wrote:
>> >>
>> >>
>> >>
>> >> Hi Ken,
>> >>
>> >> Sounds like you are not selecting the correct sound card?
>> >>
>> >> Are you using "Soundcard Select"?
>> >>
>> >> If not this should make it much easier to tell MMSSTV to use the Icom USB
>> >> sound card function.
>> >>
>> >> Soundcard Select is located on the Extras & Add On page. (look down the
>> >> menu on left side of page) http://mmhamsoft.amateur-radio.ca
>> >>
>> >> 73 - Ken - VE5KC
>> >> - http://amateur-radio.ca
>> >> - http://ham-radio.ca
>> >>
Messages in this topic (7)
________________________________________________________________________
1c. Re: Icom IC-7200 with HRD and MMSSTV help Solved!
Posted by: "kb61751" kb61751(AT)yahoo.com kb61751
Date: Mon Jul 12, 2010 6:48 am ((PDT))
Thanks for all your help. Problem solved
--- In MM-SSTV(AT)yahoogroups.com, "kb61751" <kb61751(AT)...> wrote:
> >
> > Yes I tried that, but still no audio on transmit. I have the radio set to USB (for 20m) It keys the transmitter, but no audio on transmit, great on receive.
> >
> > --- In MM-SSTV(AT)yahoogroups.com, "Ken" <ve5kc(AT)> wrote:
>> > >
>> > >
>> > >
>> > > Hi Ken,
>> > >
>> > > Sounds like you are not selecting the correct sound card?
>> > >
>> > > Are you using "Soundcard Select"?
>> > >
>> > > If not this should make it much easier to tell MMSSTV to use the Icom USB sound card function.
>> > >
>> > > Soundcard Select is located on the Extras & Add On page. (look down the menu on left side of page) http://mmhamsoft.amateur-radio.ca
>> > >
>> > > 73 - Ken - VE5KC
>> > > - http://amateur-radio.ca
>> > > - http://ham-radio.ca
Messages in this topic (7)
________________________________________________________________________
________________________________________________________________________
2. Unwanted TX while on receive Update.
Posted by: "m0cov" vic.m0cov(AT)ntlworld.com m0cov
Date: Mon Jul 12, 2010 6:50 am ((PDT))
Thankyou "Gentlemen" for your suggestions as to my fault of getting unwanted TX while in receive mode after normal setup with MMSSTV.
I have found the fault/setting I had got the "RTS" box ticked in the setup TX window.I have the "Exclusive lock" ticked but if I tick the rts box the fault returns.Thanks again as I was very greatful for your suggestions and taking the time to reply.
VIC M0COV City of COVENTRY UK
Messages in this topic (1)
******************************************************************
ABOVE IS A CROSS POST TO THE PACKET RADIO NETWORK IN AN EFFORT TO
PROMOTE FURTHER INTEREST IN SLOW SCAN TELEVISION AND PACKET RADIO
Courtesy Tony VK7AX VK7AX(AT)VK7AX.#ULV.TAS.AUS.OC
******************************************************************
Read previous mail | Read next mail
| |
