| |
VK7AX > MMSSTV 21.08.10 13:19l 267 Lines 8863 Bytes #999 (0) @ WW
BID : VK7AX2108WQ
Read: GUEST
Subj: [MM-SSTV] Digest Number 2167
Path: ON0AR<7M3TJZ<F6CDD<VE2RXY<VK7AX
Sent: 100821/1314Z @:VK7AX.#ULV.TAS.AUS.OC #:10657 [Ulverstone] FBB7.00g $:VK7A
From: VK7AX@VK7AX.#ULV.TAS.AUS.OC
To : MMSSTV@WW
There are 7 messages in this issue.
Topics in this digest:
1a. Port?
From: kd4vqt
1b. Re: Port?
From: jdow
1c. Re: Port?
From: Gary Headrick
1d. Re: Port?
From: George Hughes
1e. Re: Port?
From: Ken
2a. Re: MMSSTV Version 1.12 Released
From: noboba
3. MM 10th Anniversary - Sign the Guest book soon or be left out!
From: Ken
Messages
________________________________________________________________________
1a. Port?
Posted by: "kd4vqt" gheadrick(AT)hotmail.com kd4vqt
Date: Wed Aug 18, 2010 11:46 am ((PDT))
Recewntly I acquired a new computer and my interface program has set port 10 as the access port for ham programs. My current copy of MMSSTV will only allow ports up to 8. How can I install the program so it will accept my port 10?
Messages in this topic (5)
________________________________________________________________________
1b. Re: Port?
Posted by: "jdow" jdow(AT)earthlink.net ferdyfubar
Date: Wed Aug 18, 2010 12:47 pm ((PDT))
You can't.
But there are two things you can do. Get the recent revision from the
MMHAMSOFT site or get scselect from this forum's download area. The former
allows more ports natively. The scselect solution acts as an add-on to
allow selecting more ports. But the MMSSTV you have, alone, can't do it
if you insist on no upgrade and no add-on.
The new version of MMSSTV was very recently announced. The scselect add-on
has been around for some time now.
{^_^} Joanne, W6MKU
----- Original Message -----
From: "kd4vqt" <gheadrick(AT)hotmail.com>
Sent: Monday, 2010/August/16 17:06
> > Recewntly I acquired a new computer and my interface program has set port
> > 10 as the access port for ham programs. My current copy of MMSSTV will
> > only allow ports up to 8. How can I install the program so it will accept
> > my port 10?
Messages in this topic (5)
________________________________________________________________________
1c. Re: Port?
Posted by: "Gary Headrick" gheadrick(AT)hotmail.com kd4vqt
Date: Wed Aug 18, 2010 4:05 pm ((PDT))
I have version 1.12 and 8 is still the highesty port available. Is there a later version? I can not find a copy of sc_scan. What I find is some type of media file and can not be opened. Hate to be a problem but am still having problems.
Gary L. Headrick
Cumming, Ga.
gheadrick(AT)hotmail.com
KD4VQT Amateur Extra Class
.
To: MM-SSTV(AT)yahoogroups.com
From: jdow(AT)earthlink.net
Date: Wed, 18 Aug 2010 12:46:22 -0700
Subject: Re: [MM-SSTV] Port?
You can't.
But there are two things you can do. Get the recent revision from the
MMHAMSOFT site or get scselect from this forum's download area. The former
allows more ports natively. The scselect solution acts as an add-on to
allow selecting more ports. But the MMSSTV you have, alone, can't do it
if you insist on no upgrade and no add-on.
The new version of MMSSTV was very recently announced. The scselect add-on
has been around for some time now.
{^_^} Joanne, W6MKU
----- Original Message -----
From: "kd4vqt" <gheadrick(AT)hotmail.com>
Sent: Monday, 2010/August/16 17:06
> > Recewntly I acquired a new computer and my interface program has set port
> > 10 as the access port for ham programs. My current copy of MMSSTV will
> > only allow ports up to 8. How can I install the program so it will accept
> > my port 10?
Messages in this topic (5)
________________________________________________________________________
1d. Re: Port?
Posted by: "George Hughes" ghhughes(AT)cox.net af4gh
Date: Wed Aug 18, 2010 7:57 pm ((PDT))
I assume with a new computer all you have are USB ports. I also assume that you are using a USB to serial converter. So here we go.
Right click on "My Computer" then at the bottom left click "Properties". In "Properties" select "Device Manager". Scroll down to the section on
"Ports". You should see all your ports listed. Double click on the one that you say the system selected and open it up. I believe it is in the details section
you should be able to change the port to what you need. That assumes that all you USB ports aren't full forcing the system the have to pick port 10.
Hope I didn't miss anything, if I did I know someone will jump in and straighten me out.
de AF4GH
From: kd4vqt
Sent: Monday, August 16, 2010 8:06 PM
To: MM-SSTV(AT)yahoogroups.com
Subject: [MM-SSTV] Port?
Recewntly I acquired a new computer and my interface program has set port 10 as the access port for ham programs. My current copy of MMSSTV will only allow ports up to 8. How can I install the program so it will accept my port 10?
Messages in this topic (5)
________________________________________________________________________
1e. Re: Port?
Posted by: "Ken" ve5kc(AT)ham-radio.ca ve5kc
Date: Wed Aug 18, 2010 10:42 pm ((PDT))
Soundcard select is fully documented and is available for download on the MM Hamsoft website. It should no longer be needed for MMTTY or MMSSTV if using the newest versions. It can still be used with MMVARI until an update is released.
73 - Ken - VE5KC
- http://amateur-radio.ca
- http://ham-radio.ca
MM Hamsoft & MMTTY 10th Anniversary
Sign the Guestbook (AT) http://mmhamsoft.amateur-radio.ca
--- In MM-SSTV(AT)yahoogroups.com, "jdow" <jdow(AT)...> wrote:
> >
> > You can't.
> >
> > But there are two things you can do. Get the recent revision from the
> > MMHAMSOFT site or get scselect from this forum's download area. The former
> > allows more ports natively. The scselect solution acts as an add-on to
> > allow selecting more ports. But the MMSSTV you have, alone, can't do it
> > if you insist on no upgrade and no add-on.
> >
> > The new version of MMSSTV was very recently announced. The scselect add-on
> > has been around for some time now.
> >
> > {^_^} Joanne, W6MKU
> > ----- Original Message -----
> > From: "kd4vqt" <gheadrick(AT)...>
> > Sent: Monday, 2010/August/16 17:06
> >
> >
>> > > Recewntly I acquired a new computer and my interface program has set port
>> > > 10 as the access port for ham programs. My current copy of MMSSTV will
>> > > only allow ports up to 8. How can I install the program so it will accept
>> > > my port 10?
Messages in this topic (5)
________________________________________________________________________
________________________________________________________________________
2a. Re: MMSSTV Version 1.12 Released
Posted by: "noboba" ja7ude(AT)gmail.com noboba
Date: Wed Aug 18, 2010 4:29 pm ((PDT))
Marc,
Thanks for your reply. I did not know that TS-450 generates the CW side tone even in the SSB mode.
You might want to check out EXTFSK, which originally is designed for generating RTTY FSK signals, but allows you to select RTS or DTR for the MMSSTV PTT.
73
Oba
JA7UDE
--- In MM-SSTV(AT)yahoogroups.com, "isabelle.fourias" <f5.laurent(AT)...> wrote:
> >
> > Hi Oba,
> >
> > My trx is a Kenwood TS450, and even in SSB mode, I heard the tune in the speaker, when I use a key or connect my interface (with DTR on).
> > Of course, in this case, there in not TX, that's good for learning the cw hi...
> > Probably, other TRX havre the same effect.
> >
> > With mmsstv, that the only one, I must disconnect the cable between the interface and the cw plug on the trx.
> >
> > Pse add this option in a next release.
> > All new programs now, have this feature in the setup (HRD, MixW, Easypal, Ros, cwtype-get, ......), ...... that's very useful
> >
> > 73 Marc
Messages in this topic (6)
________________________________________________________________________
________________________________________________________________________
3. MM 10th Anniversary - Sign the Guest book soon or be left out!
Posted by: "Ken" ve5kc(AT)ham-radio.ca ve5kc
Date: Wed Aug 18, 2010 11:32 pm ((PDT))
Time is running out! The MM Hamsoft Guest book will only be open for a few more days.
If you have not taken the time to add your comment please do it as soon as possible. Also be sure to check back and see the great comments being left by other users.
After the end of the month the guest book will be closed and made read only in the MM Hamsoft history section. This is your chance to be a part of our history!
73 - Ken - VE5KC
- http://amateur-radio.ca
- http://ham-radio.ca
MM Hamsoft & MMTTY 10th Anniversary
Sign the Guest-book (AT) http://mmhamsoft.amateur-radio.ca
Messages in this topic (1)
******************************************************************
ABOVE IS A CROSS POST TO THE PACKET RADIO NETWORK IN AN EFFORT TO
PROMOTE FURTHER INTEREST IN SLOW SCAN TELEVISION AND PACKET RADIO
Courtesy Tony VK7AX VK7AX(AT)VK7AX.#ULV.TAS.AUS.OC
******************************************************************
Read previous mail | Read next mail
| |
