| |
VK7AX > OZAPRS 13.12.07 13:16l 373 Lines 9157 Bytes #999 (0) @ VKNET
BID : VK7AX-1312KB
Read: GUEST
Subj: Ozaprs Digest, Vol 28, Issue 12
Path: ON0AR<F4BWT<VE2PKT<ZL2BAU<VK7NW
Sent: 071213/1207Z @:VK7NW.#ULV.TAS.AUS.OC #:32210 [NWTARIG] FBB7.00g $:VK7AX-1
From: VK7AX@VK7NW.#ULV.TAS.AUS.OC
To : OZAPRS@VKNET
Today's Topics:
1. Help please - Part number for TM-D700A Head Bracket (Ian Mills)
2. Re: Help please - Part number for TM-D700A Head Bracket
(Peter Bye)
3. Re: Help please - Part number for TM-D700A Head Bracket
(Ian Mills)
4. Re: Help please - Part number for TM-D700A Head Bracket
(Peter Bye)
5. Re: Help please - Part number for TM-D700A Head Bracket
(Ian Mills)
----------------------------------------------------------------------
Message: 1
Date: Wed, 12 Dec 2007 15:35:11 +1100
From: Ian Mills <imills@awa.com.au>
Subject: [OZAPRS] Help please - Part number for TM-D700A Head Bracket
To: "'ozaprs@aprs.net.au'" <ozaprs@aprs.net.au>
Can anyone with a d700 please let me know the part number for the head mounting bracket? Maybe the part number is on the rear of the plastic?
I need one and Kenwood are saying they can't order it without knowing the part number .... very helpful ...
Any help would be greatly appreciated as the head sometimes goes flying when I go around a corner too fast!!!
Cheers
Ian vk2him
------------------------------
Message: 2
Date: Wed, 12 Dec 2007 16:32:53 +1100
From: "Peter Bye" <vk1nfi@netspace.net.au>
Subject: Re: [OZAPRS] Help please - Part number for TM-D700A Head
Bracket
To: "'VK / ZL APRS Users'" <ozaprs@aprs.net.au>
Ian,
According to the D-700 owners manual
"Front Panel Mounting Bracket (One Pair) J29-0663-XX & J29-0664-XX"
Should have been included with the item at purchase...
Hope this helps
Pete VK1NFI
-----Original Message-----
From: ozaprs-bounces@aprs.net.au [mailto:ozaprs-bounces@aprs.net.au] On
Behalf Of Ian Mills
Sent: Wednesday, 12 December 2007 3:35 PM
To: 'ozaprs@aprs.net.au'
Subject: [OZAPRS] Help please - Part number for TM-D700A Head Bracket
Can anyone with a d700 please let me know the part number for the head
mounting bracket? Maybe the part number is on the rear of the plastic?
I need one and Kenwood are saying they can't order it without knowing the
part number .... very helpful ...
Any help would be greatly appreciated as the head sometimes goes flying when
I go around a corner too fast!!!
Cheers
Ian vk2him
------------------------------
Message: 3
Date: Wed, 12 Dec 2007 16:47:21 +1100
From: Ian Mills <imills@awa.com.au>
Subject: Re: [OZAPRS] Help please - Part number for TM-D700A Head
Bracket
To: "'ozaprs@aprs.net.au'" <ozaprs@aprs.net.au>
Peter,
Many thanks, that's a great help!
I bought the radio 4th hand from vk3mhz who bought it from Andrew vk4tec who bought it off ...??
Must have lost the bracket along the way !
P.S. .. I responded to your question of where I am located directly to your email address.
I'd be happy to setup a fill-in digi if needed till amw-4 gets relocated .. just need a tnc
now I discovered the d7 I planned to use can't digi via ui-view
Cheers
Ian
_____
Ian,
According to the D-700 owners manual
"Front Panel Mounting Bracket (One Pair) J29-0663-XX & J29-0664-XX"
Should have been included with the item at purchase...
Hope this helps
Pete VK1NFI
_____
From: Ian Mills
Sent: Wednesday, 12 December 2007 3:35 PM
To: 'ozaprs@aprs.net.au'
Subject: Help please - Part number for TM-D700A Head Bracket
Can anyone with a d700 please let me know the part number for the head mounting bracket? Maybe the part number is on the rear of the plastic?
I need one and Kenwood are saying they can't order it without knowing the part number .... very helpful ...
Any help would be greatly appreciated as the head sometimes goes flying when I go around a corner too fast!!!
Cheers
Ian vk2him
------------------------------
Message: 4
Date: Wed, 12 Dec 2007 16:59:03 +1100
From: "Peter Bye" <vk1nfi@netspace.net.au>
Subject: Re: [OZAPRS] Help please - Part number for TM-D700A Head
Bracket
To: "'VK / ZL APRS Users'" <ozaprs@aprs.net.au>
Not a problem Ian,
Re the fill in digi, what is coverage up your way like?? Especially since
the move of AMW-1?
I was toying with asking if AMW-4 could go to your place temporarily,
however, I believe there will be a significant loss of coverage out west and
sth of Nowra..
If we could get a good idea of the coverage in and around your location it
would help to determine if anything is required and what exactly we need (TX
pwr and antenna).
As for the D7, I haven't followed that discussion, so I cannot comment. I
did have a spare TNC but that has gone onto VK1RBM-1 as the old one melted.
(literally)
73
Pete VK1NFI / VK2MPJ
-----Original Message-----
From: ozaprs-bounces@aprs.net.au [mailto:ozaprs-bounces@aprs.net.au] On
Behalf Of Ian Mills
Sent: Wednesday, 12 December 2007 4:47 PM
To: 'ozaprs@aprs.net.au'
Subject: Re: [OZAPRS] Help please - Part number for TM-D700A Head Bracket
Peter,
Many thanks, that's a great help!
I bought the radio 4th hand from vk3mhz who bought it from Andrew vk4tec who
bought it off ...??
Must have lost the bracket along the way !
P.S. .. I responded to your question of where I am located directly to your
email address.
I'd be happy to setup a fill-in digi if needed till amw-4 gets relocated ..
just need a tnc
now I discovered the d7 I planned to use can't digi via ui-view
Cheers
Ian
_____
Ian,
According to the D-700 owners manual
"Front Panel Mounting Bracket (One Pair) J29-0663-XX & J29-0664-XX"
Should have been included with the item at purchase...
Hope this helps
Pete VK1NFI
_____
From: Ian Mills
Sent: Wednesday, 12 December 2007 3:35 PM
To: 'ozaprs@aprs.net.au'
Subject: Help please - Part number for TM-D700A Head Bracket
Can anyone with a d700 please let me know the part number for the head
mounting bracket? Maybe the part number is on the rear of the plastic?
I need one and Kenwood are saying they can't order it without knowing the
part number .... very helpful ...
Any help would be greatly appreciated as the head sometimes goes flying when
I go around a corner too fast!!!
Cheers
Ian vk2him
------------------------------
Message: 5
Date: Wed, 12 Dec 2007 17:12:22 +1100
From: Ian Mills <imills@awa.com.au>
Subject: Re: [OZAPRS] Help please - Part number for TM-D700A Head
Bracket
To: "'ozaprs@aprs.net.au'" <ozaprs@aprs.net.au>
Peter,
I just bought a 2m Jpole so I'll have to see how that goes when I put it up this weekend (hopefully).
Take a look at this photo from the balcony of my place overlooking Seven Mile Beach and beyond.
http://www.sellersourcebook.net/users/2519/gerroa2.jpg <http://www.sellersourcebook.net/users/2519/gerroa2.jpg>
http://www.sellersourcebook.net/users/2519/gerroa.jpg <http://www.sellersourcebook.net/users/2519/gerroa.jpg>
>From my car with a small 1/4 wave and 50w I can get into amw-1 sometimes, -2 sometimes and -4.
I think the jpole will make a difference, I'll let you know.
Cheers
_____
Not a problem Ian,
Re the fill in digi, what is coverage up your way like?? Especially since
the move of AMW-1?
I was toying with asking if AMW-4 could go to your place temporarily,
however, I believe there will be a significant loss of coverage out west and
sth of Nowra..
If we could get a good idea of the coverage in and around your location it
would help to determine if anything is required and what exactly we need (TX
pwr and antenna).
As for the D7, I haven't followed that discussion, so I cannot comment. I
did have a spare TNC but that has gone onto VK1RBM-1 as the old one melted.
(literally)
73
Pete VK1NFI / VK2MPJ
_____
From: Ian Mills
Sent: Wednesday, 12 December 2007 4:47 PM
To: 'ozaprs@aprs.net.au'
Subject: RE: Help please - Part number for TM-D700A Head Bracket
Peter,
Many thanks, that's a great help!
I bought the radio 4th hand from vk3mhz who bought it from Andrew vk4tec who bought it off ...??
Must have lost the bracket along the way !
P.S. .. I responded to your question of where I am located directly to your email address.
I'd be happy to setup a fill-in digi if needed till amw-4 gets relocated .. just need a tnc
now I discovered the d7 I planned to use can't digi via ui-view
Cheers
Ian
_____
Ian,
According to the D-700 owners manual
"Front Panel Mounting Bracket (One Pair) J29-0663-XX & J29-0664-XX"
Should have been included with the item at purchase...
Hope this helps
Pete VK1NFI
_____
From: Ian Mills
Sent: Wednesday, 12 December 2007 3:35 PM
To: 'ozaprs@aprs.net.au'
Subject: Help please - Part number for TM-D700A Head Bracket
Can anyone with a d700 please let me know the part number for the head mounting bracket? Maybe the part number is on the rear of the plastic?
I need one and Kenwood are saying they can't order it without knowing the part number .... very helpful ...
Any help would be greatly appreciated as the head sometimes goes flying when I go around a corner too fast!!!
Cheers
Ian vk2him
------------------------------
_______________________________________________
Ozaprs mailing list
Ozaprs@aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
End of Ozaprs Digest, Vol 28, Issue 12
**************************************
Read previous mail | Read next mail
| |
