| |
VK7AX > OZAPRS 19.12.07 08:33l 356 Lines 8744 Bytes #999 (0) @ VKNET
BID : VK7AX-1912SZ
Read: GUEST
Subj: Ozaprs Digest, Vol 28, Issue 17
Path: ON0AR<IW2OAZ<CX2SA<VK2DOT<VK1DSN<VK6BBS<VK6HGR<VK7NW
Sent: 071219/0350Z @:VK7NW.#ULV.TAS.AUS.OC #:33172 [NWTARIG] FBB7.00g $:VK7AX-1
From: VK7AX@VK7NW.#ULV.TAS.AUS.OC
To : OZAPRS@VKNET
Today's Topics:
1. Re: APRS automated into your home (Ray Wells)
2. Re: APRS automated into your home (Ray Wells)
----------------------------------------------------------------------
Message: 1
Date: Tue, 18 Dec 2007 17:57:32 +1100
From: Ray Wells <vk2tv@exemail.com.au>
Subject: Re: [OZAPRS] APRS automated into your home
To: VK / ZL APRS Users <ozaprs@aprs.net.au>
Cc: ozaprs-bounces@aprs.net.au
And the wife saying, "you turned the lights on half an hour ago, where the
heck have you been?"
I can get into enough trouble without automating it :-)
Ray vk2tv
Shaun Pitcher wrote:
Thanks Geoff,
I was mainly interested in the part that interfaces with APRS, so it
remained on topic. I will investigate when I get a bit of time, say
around 2012?
Yes, your could hoax as Geoff and set his lights off! I was in Melbourne
for a while when I first set up. GPS stream was not going to the Modem.
Back in Sydney now.
Regards,
Shaun Pitcher
"Geoff" [1]<geoff@gatwards.org>
Sent by: [2]ozaprs-bounces@aprs.net.au
18/12/2007 02:01 PM
Please respond to
VK / ZL APRS Users [3]<ozaprs@aprs.net.au>
To
"'VK / ZL APRS Users'" [4]<ozaprs@aprs.net.au>
cc
Subject
Re: [OZAPRS] APRS automated into your home
Hi Shaun,
Home Automation is a very broad area to play in, beyond the scope of this
mailing list, however here is a brief summary of what I do here.
I run an application called Homeseer ([5]http://www.homeseer.com) which
manages
all of my automation. It talks to several IO controllers via Ethernet,
and
these in turn read various inputs and control outputs, including Relays to
turn on and off various lights. It also has quite a good TextToSpeech
engine embedded, which drives several speakers around the house via an
amplifier. (The speakers are also used to play MP3/Streaming audio)
A set of RF motion detectors and keypads also integrate with the system,
and
to finish it off the whole lot is controlled in a friendly manner from a
touchscreen panel in the hall, driven by another application called
MainLobby ([6]http://www.cinemaronline.com/mainlobby.html)
On top of the basic HS package, there are a large number of plugins,
including one called APRSParser, written by KB1MTS. This plugin connects
directly to the APRS-IS, and you set up a 'device' within the automation
package for each callsign you need. (I have once device called VK2XJG-9)
The plugin also has configurable locations, I set up 'home' and 'work' as
the appropriate coordinates for each.
This device can then trigger various events when pre-defined conditions
are
met. In my case, one example is I announce a text string when VK2XJG-9 is
at a position less than 2km from 'home'.
As I mentioned - it's a very complex and large area to start playing with
-
but it can be a lot of fun - and very time consuming :-)
Regards,
Geoff VK2XJG
-----Original Message-----
From: [7]ozaprs-bounces@aprs.net.au [[8]mailto:ozaprs-bounces@aprs.net.au] On
Behalf Of Shaun Pitcher
Sent: Monday, December 17, 2007 4:21 PM
To: [9]ozaprs@aprs.net.au
Subject: [OZAPRS] APRS automated into your home
Hi Geoff,
I am interested in the method you use to get the house to play the
announcement and turn the lights on? Can you expand on how it works?
Regards,
Shaun Pitcher
[10]geoff@gatwards.org
Sent by: [11]ozaprs-bounces@aprs.net.au
16/11/2007 10:33 AM
Please respond to
VK / ZL APRS Users [12]<ozaprs@aprs.net.au>
To
"VK / ZL APRS Users" [13]<ozaprs@aprs.net.au>
cc
Subject
Re: [OZAPRS] VK2XPP-9 ending testing, I hope.
LOL :-)
It does have some practical uses - I have automated our house to some
extent and have integrated APRS into the home automation. The house plays
an announcement when I am on the way home and within 2km and also sets up
a few conditions, turns on lights etc all just from receiving a well
placed posit message :-)
Don't turn off the beacon - set it to every 15 or every 30... It can
still be a handy thing to have, but it's not essential.
Forgot to mention the other comment you had with the TO field ... This
sets the icon that is displayed, GPSMV sets it to a car. If you send to
APRS I think it just comes up with a generic dot or X symbol (can't
remember exactly)
Regards,
Geoff
Thanks Geoff,
Kantronics KP3 with 8.2.
Beacon is every 5 at the moment. I might just turn it off.
Fun to watch isn't it. I tracked the misses last night as she drove
around. She smiles as she gets out of the car and I am already standing
there waiting with the door open.
Regards,
Shaun Pitcher
[14]spitcher@energy.com.au
"Geoff" [15]<geoff@gatwards.org>
Sent by: [16]ozaprs-bounces@aprs.net.au
15/11/2007 09:29 PM
Please respond to
VK / ZL APRS Users [17]<ozaprs@aprs.net.au>
To
"'VK / ZL APRS Users'" [18]<ozaprs@aprs.net.au>
cc
Subject
Re: [OZAPRS] VK2XPP-9 ending testing, I hope.
Shaun,
If you are using a standard TNC, then yes, the beacon comment does show
up
as the GPS string. The beacon comment in UI-View (and other apps) only
really works properly for a fixed APRS format beacon (e.g. Digipeater
that
does not move) or for Mic-E compressed posits.
The Status text will show up, provided your BTEXT starts with a >
The BTEXT will only be transmitted at intervals determined by the BEACON
setting, the recommendation is BEACON EVERY 30 which means you will
send
ONE status message every 30 minutes. This is a separate packet to the
posit, and doesn't really convey any useful information, so we recommend
not
sending too often.
Been watching you drive home tonight - looks good :-)
Regards
Geoff VK2XJG
-----Original Message-----
From: [19]ozaprs-bounces@aprs.net.au [[20]mailto:ozaprs-bounces@aprs.net.au] On
Behalf Of Shaun Pitcher
Sent: Wednesday, November 14, 2007 6:18 AM
To: [21]ozaprs@aprs.net.au
Subject: [OZAPRS] VK2XPP-9 ending testing, I hope.
Hi All,
I have been running for a while now with mostly success. I was tracked
successfully to Teralba near Newcastle, to find the field day postponed.
Bummer.
The only issue I have at the moment is the beacon comment in UI-Veiw
comes
up as my $GPRMC sentence as does my frame. I was wondering if this is a
Paradigm issue as I am using Wide1-1, wide2-1.
Also my status does not seem to come up in the status despite having the
beacon start with a '>". Should my beacon address be APRS or GPSMV?
Any other comment, especially if I am causing problems and are unaware
of
it, would be appreciated. Thanks for the learning experience.
Regards,
Shaun Pitcher
[22]spitcher@energy.com.au
----------------------------------------------------------------------------
References
1. mailto:geoff@gatwards.org
2. mailto:ozaprs-bounces@aprs.net.au
3. mailto:ozaprs@aprs.net.au
4. mailto:ozaprs@aprs.net.au
5. http://www.homeseer.com/
6. http://www.cinemaronline.com/mainlobby.html
7. mailto:ozaprs-bounces@aprs.net.au
8. mailto:ozaprs-bounces@aprs.net.au
9. mailto:ozaprs@aprs.net.au
10. mailto:geoff@gatwards.org
11. mailto:ozaprs-bounces@aprs.net.au
12. mailto:ozaprs@aprs.net.au
13. mailto:ozaprs@aprs.net.au
14. mailto:spitcher@energy.com.au
15. mailto:geoff@gatwards.org
16. mailto:ozaprs-bounces@aprs.net.au
17. mailto:ozaprs@aprs.net.au
18. mailto:ozaprs@aprs.net.au
19. mailto:ozaprs-bounces@aprs.net.au
20. mailto:ozaprs-bounces@aprs.net.au
21. mailto:ozaprs@aprs.net.au
22. mailto:spitcher@energy.com.au
23. http://www.energy.com.au/
24. mailto:Ozaprs@aprs.net.au
25. http://aprs.net.au/mailman/listinfo/ozaprs
26. mailto:Ozaprs@aprs.net.au
27. http://aprs.net.au/mailman/listinfo/ozaprs
28. http://www.energy.com.au/
29. mailto:Ozaprs@aprs.net.au
30. http://aprs.net.au/mailman/listinfo/ozaprs
31. mailto:Ozaprs@aprs.net.au
32. http://aprs.net.au/mailman/listinfo/ozaprs
33. http://www.energy.com.au/
34. mailto:Ozaprs@aprs.net.au
35. http://aprs.net.au/mailman/listinfo/ozaprs
36. mailto:Ozaprs@aprs.net.au
37. http://aprs.net.au/mailman/listinfo/ozaprs
38. http://www.energy.com.au/
39. mailto:Ozaprs@aprs.net.au
40. http://aprs.net.au/mailman/listinfo/ozaprs
------------------------------
Message: 2
Date: Tue, 18 Dec 2007 18:56:52 +1100
From: Ray Wells <vk2tv@exemail.com.au>
Subject: Re: [OZAPRS] APRS automated into your home
To: VK / ZL APRS Users <ozaprs@aprs.net.au>
Geoff,
Have sent some plots to your ftp site.
Ray vk2tv
------------------------------
_______________________________________________
Ozaprs mailing list
Ozaprs@aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
End of Ozaprs Digest, Vol 28, Issue 17
**************************************
Read previous mail | Read next mail
| |
