| |
VK7AX > UIDIGI 16.04.05 04:19l 494 Lines 13328 Bytes #999 (0) @ VKNET
BID : VK7AX-1604US
Read: GUEST
Subj: [Ui-Digi] Digest #468
Path: ON0AR<ON0AR<VK7AX
Sent: 050416/0339z @:VK7AX.#ULV.TAS.AUS.OC [NWTNOS-NWTas] #:35717 $:VK7AX-1604U
Date: 13 Apr 2005 12:52:07 -0000
From: uidigi@yahoogroups.com
To: uidigi@yahoogroups.com
Subject: [uidigi] Digest Number 468
There is 1 message in this issue.
Topics in this digest:
1. Help
From: "py4fg" <carlosfelipe@estadao.com.br>
________________________________________________________________________
________________________________________________________________________
Message: 1
Date: Wed, 13 Apr 2005 12:15:26 -0000
From: "py4fg" <carlosfelipe@estadao.com.br>
Subject: Help
I have a network APRS in São Paulo State, Brazil, it´s have PY2BRF-
15, PY2RR-15, PY4LH-15 and PY4CZ-15, all TNC2 ( MFJ1270C and Tiny II)
with eprom 27c256 soft UIDIG 1.93B, and a IGATE PY2ZE-1 running in
WinXP with UIVIEW 32 .
Other digis of the net is KPC3, it happens that are saying that KPC3
are much better than the soft UIDIG.
Unhappily I am suffering pressures to turn off the digis with UIDIG.
This way I request you an explanation of the comparison between UIDIG
and KPC3, because I believe that doesn't exist communication problems
between the KPC3 and UIDIG.
I need its help, because still desire to install more digis with UIDIG
My configuration UIDIG parameters is:( please if have any parameter
wrong, help me) :
/*
UIDIGI Configuration source file
Version 1.9 BETA 3 20040101
Written by Marco Savegnago IW3FQG
*/
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Set the digipeater ax.25 address callsign (SSID allowed)
// Up to 6 characters+SSID
// Digicall [t]
DigipeaterCallsign = PY2BRF-15
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Set the digipeater address alias
// Up to 6 characters (NO SSID)
// DIGIAlias [t]
DigipeaterAlias = APRSSP
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Digipeater Info Text up to 80 char
// Info [t]
//
1234567890123456789012345678901234567890123456789012345678901234567890
1234567890
InfoText = UIDIG 1.9B PY2BRF-15 Serra Negra, SP
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Path used when SSID routing is used (Up to 8 hops)
// (Direction) Path
// xpath [path]
NorthPath =
SouthPath =
EastPath =
WestPath =
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// BudList Calls (up to 8 calls, default none)
// All SSID's of base call will be ignored
// BUdlist [calls]
BudList =
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// UI Generic Calls (up to 8)
// Calls recognized by digi to repeat
// Default (RELAY, WIDE, TRACE)
// Uidigi [calls]
UIDigiCall = RELAY, WIDE, TRACE
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// UI Flood Call (up to 6 characters)
// Default (WIDE)
// UIFlood [call]
UIFloodCall = WIDE
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// UI Trace Call (up to 6 characters)
// Default (TRACE)
// UITrace [call]
UITraceCall = TRACE
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Txdelay (default 30 = 300)
// range 1-255 x10ms
// TXdelay [n]
TxDelay = 40
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Fullduplex (default 0)
// Enables (1) or Disables (0)
// NO COMMAND FROM CONSOLE
FullDuplex = 0
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// PPErsistence (default 64)
// range 1-255
// Parameter fo channel access timing
// PErsistance [n]
PPersistance = 128
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Slottime (default 10)
// range 1-255 x100ms
// SLottime [n]
SlotTime = 10
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Frack (default 5)
// range 1-15
// Frack [n]
Frack = 4
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Maxframe (default 4)
// range 1-7
// MAxframe [n]
Maxframe = 2
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Retry (default 10)
// range 0-127
// RETry [n]
Retry = 10
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// RespTime 2 (default 100)
// range 0-6000 ms
// RESPtime [n]
RespTime = 100
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Link Check (default 18000)
// range 0-65535 ms
// CHeck [n]
LinkCheck = 18000
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Duplicate Packet Suppression Interval second (default 28)
// range 0-180 seconds
// UICheck [n]
DuplicateSuppression = 35
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Loop Packet Suppression Interval Mask (default 3)
// 0x01 = Do not repeat frame with source address equal to
digipeater call or alias
// 0x02 = Do not repeat frame with the digipeater call in the
already digipeated via list
// range 0-3
// UILoop [n]
LoopSuppression = 7
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Treat different SSID in destination call (default 1)
// Enables (1) or Disables (0) UISSID digipeating mode
// Used for SSID Directional routing
// UISsid [n]
HandleUISSID = 1
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Reply to Query (default 1)
// Enables (1) or Disables (0) ?APRS? response query
// UIQuery [n]
ReplyToQuery = 1
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// UIFLOOD Algorithm flag (default 0)
// bit 0 make call substitution after the last WIDEn-n digied
// bit 1 insert callsign before WIDEn-n
// UIFLDfl [n]
UIFLOODOptions = 0
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// UITRACE Algorithm flag (default 0)
// bit 0 makes call substitution after the last TRACEn-n digied
// bit 1 Disables
// UITRFl [n]
UITRACEOptions = 0
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Make call substitution when repeat frames addressed to UIDIGI
Callsign
// default (1)
// Enables (1) or Disables (0) UIDIGI callsign substituion for UIDIGI
calls
// UIDCsb [n]
UIDIGICallSubstitution = 1
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Preempt calls (default none)
// see docs
PreemptCalls =
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Preempt add (default none)
// see docs
PreemptAdd =
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Preempte Digipeater (default 0)
// see docs
PreeemptedDigipeat = 0
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Don't change SSID (decrement) to UI Message (frame with info that
start
// with char '~' default (1)
// 0 disables
// range 0-1
// UIMessage [n]
UIMessage = 1
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Process only UI Frame (default 1)
// Enable processing of UI frame only
// 0 disables
// range 0-1
// UIOnly [n]
UIOnly = 1
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// PID of processed frames (default 240)
// Enable frame filtering algorithm base on PID of frame
// 0 disables
// range 0-255
// UIPid [n]
UIPID = 240
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Sysop Password up to 80 char
// NO CONNAMD FROM LOCAL CONSOLE
SysopPassword = 1234567890
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Beacon x interval Seconds
// default 1 = 600
// default 2 = 1800
// default 3 = 3600
// range 0-65535 seconds
// BEacon [x] [n]
Beacon1Interval = 600
Beacon2Interval = 1200
Beacon3Interval = 2400
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Beacon x offset (default 0)
// range 0-65535 seconds
// BEACONOffset [x] [n]
Beacon1Offset = 0
Beacon2Offset = 0
Beacon3Offset = 0
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Digipeater Beacon x Text up to 70 char
// see APRS reference doc for layout
// BText [n] [t]
//
1234567890123456789012345678901234567890123456789012345678901234567890
Beacon1Text = !2237.23S/04640.67W#PHG7490/Serra
Negra, SP APRS DIGI (UIDIG1.93B)
Beacon2Text = !2237.23S/04640.67W#PHG7490/Serra
Negra, SP APRS DIGI (UIDIG1.93B)
Beacon3Text = !2237.23S/04640.67W#PHG7490/Serra
Negra, SP APRS DIGI (UIDIG1.93B)
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Destination ax.25 address of beacon (6 characters + SSID)
// See APRS working group documentation APNUnn
// UNproto [t]
BeaconDestination = APNU19
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// AX.25 Beacon x path (up to 8 hops)
// Path that Beacon x will be sent out with
// Bdl [x] [path]
Beacon1Path = WIDE
Beacon2Path = WIDE2-2
Beacon3Path = WIDE4-4
AuxPath =
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Destination ax.25 address of aux input device string
// Up to 6 characters + SSID
AuxDestination = AUX
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
// Aux Beacon interval (default 0)
// Sets the interval for the beacon of aux input data
// AUXRate [n]
AuxRate = 0
//--------------------------------------------------------------------
---
//--------------------------------------------------------------------
---
________________________________________________________________________
________________________________________________________________________
End Ui-Digi Digest #468
Read previous mail | Read next mail
| |
