| |
UT1HZM > FLEX 20.08.04 19:41l 31 Lines 1034 Bytes #999 (0) @ WW
BID : 56454_UT4NF
Read: GUEST
Subj: RE: Configuration problems...
Path: ON0AR<ON0AR<DB0RES<ON0BEL<IK6PYS<SP7MGD<RZ6HXA<UT4NF
Sent: 040820/1932Z @:UT4NF.VIN.UKR.EU #:56454 [Vinnytsia] FBB7.00i $:56454_UT4N
From: UT1HZM@UT4NF.VIN.UKR.EU
To : FLEX@WW
Hello to group.
> so you musst only load the dos drivers also the flexnet stuff and win98
> should not access the soundcard.
> So you must disable the soundcard on the operating system win98,
> also open the hardware manager (Click on "System" in the control panel) and
> disable the soundcard...but not the drivers
> i think the drivers are then still needed...by flexnet but the resources must
> be loaded by flexnet and not windoze so
> disable the soundcard in win98
With _DOS_ Flexnet drivers it's no problem.
We speak about Flex32 and SoundModem from Tom HB9JNX, all 32bit Win apps
and don't need to run it from DOS.
In SoundModemConfig possible to select separate type and speeds of
modulator and demodulator. I'm tryed set it, for example to 1200 baud
AFSK, set both, mod and demod, and after complete have an little window
with "I/O error....."
If I'm choice active only modulator or only demodulator its work no
problem, but work only on TX, or only RX :(
73! Serge.
Read previous mail | Read next mail
| |
